Installation

Use the extended screws for mounting but do not adjust them. Take normal vacuum precautions, avoid creating trapped volumes when mounting the motor and obstruct as few as possible of the pumping holes in the end faces. The location spigot projecting from the face of the motor is accurately concentric with the shaft and intended for precise location in a recess.

Motor Mounting Guide.gif

Warranty is void if screws are tampered with.

Do not unscrew warning.png


Revision #8
Created 8 October 2024 10:59:31 by Alex Mayger
Updated 5 March 2025 16:17:14 by Alex Mayger