Technical information General General Interface USB Type-C (appears as virtual COM port on PC Dimensions 180 mm x 105 mm x 26 mm Weight 0.6 kg Protection class IP 20 Temperatures Operation 10 °C to 60 °C, Storage -10 °C to 85 °C Power supply External 15 Vdc to 67 Vdc power supply required Power consumption 28 W maximum Motor Suitable types 2 phase bipolar stepper motor with 4 leads Phase current Up to 1 A RMS, adjustable in 30 mA steps Source voltage As supply voltage, 67 Vdc maximum Resolution 8, 16, 32, 64, 128, 256 micro-stepping Protection Short to ground and phase to phase Operating modes Remote, via USB SDE interface using an external motion controller Trigger movement vis SDE interface Joystick Bake Homing (drive to limit switches) Limits Quantity 2 Compatible switch types Mechanical NO or NC (polarity selectable) Protection Withstands continuous short to 12 V maximum Miscellaneous Source current < 1 mA Motor temperature measurement Type Selectable PT100 RTD or K-Type thermocouple Range -200 °C to 240 °C Accuracy ±5 % Fault detection RTD: Open and short-circuit Thermocouple: Open circuit only SDE (step, direction, enable) interface Type Optocoupled, bi-directional LED Levels 3.3 Vdc to 5 Vdc maximum Maximum frequency 2 MHz at 50 % duty Joystick Connection Front panel mounted 4P4C jack Input type Active low, short to ground to activate function Miscellaneous Open circuit voltage 3.3 V, source current < 3.5 mA Software Compatibility Windows 7 or later Mechanical All dimensions are in millimetres. Scope of delivery Qty. Item 1 SMD3 1 USB Type-A to USB Type-C lead 1 Pluggable terminal block, 2-way, 3.5 mm pitch 1 Pluggable terminal block, 5-way, 3.5 mm pitch 1 Pluggable terminal block, 12-way, 3.5 mm pitch 1 Type K Thermocouple Free Plug, Miniature Accessories The following accessory items are available from AML. Order Code Item SMD3JOY Joystick SPSU48V 48 Vdc, 60 W Power Supply MLF18SMD3 Lead, Feedthrough to SMD3