Search Results

The SMD3 stepper motor drive is a single-axis bipolar stepper motor drive, intended for use with AMLs range of vacuum compatible stepper motors (VCSMs), with maximum performance and minimal heat. Powerful software is supplied with the SMD3 that enables you ...

General General Interface USB Type-C (appears as virtual COM port on PC Dimensions 180 mm x 105 mm x 26 mm Weight 0.6 kg Protection class IP 20 Temperatures Operation 10 °C to 60 °C, Storage -10 °C to 85 °C Po...

Before installation WARNING: Read this manual carefully before installing and operating the SMD3. Observe the following safety instructions. Qualified personnel WARNING: All work described in this document may only be carried out by persons who have suitabl...

Getting started The quickest way to get started with the SMD3, having completed wiring up according to the previous chapter is to install the SMD3 software on your PC (see section Software), power on the SMD3 and connect it with the USB lead to the PC. The SM...

Installation and setup The SMD3 is compatible with the AML Device Control software, which can be downloaded from the Software page on our website: https://arunmicro.com/documents/software/ Connect all SMD3 devices to your computer, using a USB lead, and po...

The SMD3 appears as a virtual COM port when plugged into a PC. Configuration and control may be performed via the provided SMD3 software, your own application or any terminal program. This section is only relevant if you are using terminal software or writing...