Technical information

General
Interface	USB Type-C (appears as virtual COM port on PC
Dimensions	180 mm x 105 mm x 26 mm
Weight	0.6 kg
Protection class	IP 20
Temperatures	Operation 10 °C to 60 °C, Storage -10 °C to 85 °C
Power supply	External 15 Vdc to 67 Vdc power supply required
Power consumption	28 W maximum
Motor
Suitable types	2 phase bipolar stepper motor with 4 leads
Phase current	Up to 1 A RMS, adjustable in 30 mA steps
Source voltage	As supply voltage, 67 Vdc maximum
Resolution	8, 16, 32, 64, 128, 256 micro-stepping
Protection	Short to ground and phase to phase
Operating modes
Remote, via USB SDE interface using an external motion controller Trigger movement vis SDE interface Joystick Bake Homing (drive to limit switches)
Limits
Quantity	2
Compatible switch types	Mechanical NO or NC (polarity selectable)
Protection	Withstands continuous short to 12 V maximum
Miscellaneous	Source current < 1 mA
Motor temperature measurement
Type	Selectable PT100 RTD or K-Type thermocouple
Range	-200 °C to 240 °C
Accuracy	±5 %
Fault detection	RTD: Open and short-circuit Thermocouple: Open circuit only
SDE (step, direction, enable) interface
Type	Optocoupled, bi-directional LED
Levels	3.3 Vdc to 5 Vdc maximum
Maximum frequency	2 MHz at 50 % duty
Joystick
Connection	Front panel mounted 4P4C jack
Input type	Active low, short to ground to activate function
Miscellaneous	Open circuit voltage 3.3 V, source current < 3.5 mA
Software
Compatibility	Windows 7 or later

All dimensions are in millimetres.

Qty.	Item
1	SMD3
1	USB Type-A to USB Type-C lead
1	Pluggable terminal block, 2-way, 3.5 mm pitch
1	Pluggable terminal block, 5-way, 3.5 mm pitch
1	Pluggable terminal block, 12-way, 3.5 mm pitch
1	Type K Thermocouple Free Plug, Miniature

The following accessory items are available from AML.