Skip to main content
Advanced Search
Search Terms
Content Type

Exact Matches
Tag Searches
Date Options
Updated after
Updated before
Created after
Created before

Search Results

47 total results found

Assistance

SMD4 User Manual

In the first instance, contact the distributor or supplier of the equipment. Always quote the serial number of the instrument and firmware and software versions. Provide a written description of the problem. If the problem is related to a motor or mechanism ma...

Installation

AIGxG User Manual

Inspect the gauge structure before removing from the moulded clear plastic packing. Report any obvious damage to your AML Distributor before opening the moulded packing. Save the packing material, including the small foam plastic piece which restrains the flan...

Ion Gauge Cables

AIGxG User Manual

WARNING! The use of AML AIGLx cables is essential to achieve compliance with the EC EMC Directive, 89/336/EEC using AML and similar controllers. Extension cables are not recommended as these will prejudice compliance. 3, 6 and 9 metre cables are available, mod...

Ion Gauge Operation

AIGxG User Manual

New gauges must be operated carefully to achieve good results and long filament life. The filaments are under tension when new: run both filaments for a few seconds in emission to reduce and equalise the tension.  Operate at low emission current in order to ou...

Filament Replacement

AIGxG User Manual

Tungsten filaments have an emission life of one to three years in UHV. The life will be dependent on the residual gases present, range of pressures and vibration coupled to the filament. Tungsten filaments become brittle in use and the most common causes of fa...

Repair and Refurbishment

AIGxG User Manual

Other than gauge heads returned under warranty it is generally not economically feasible to return damaged gauges for repair. Leaking feedthroughs cannot be repaired. Distorted grid structures and failed filaments are readily repairable by users. Any gauge he...

Gas Correction Factors

AIGxG User Manual

Gas correction factor tables are are only reproduced for the convenience of the user and do not imply that use with other gases will be safe with BA ion gauges. Divide sensitivity by 100 for Pa-1; multiply by 1.33 for Torr-1. Gas Symbol Gas...

Assistance

AIGxG User Manual

In the first instance, contact the distributor or supplier of the equipment. Always quote the serial number of the instrument and firmware and software versions. Provide a written description of the problem. If the problem is related to a motor or mechanism ma...

Waste Electrical and Electronic Equipment (WEEE) Returns

WEEE Policy

In the European Union (EU), waste from electrical and electronic equipment (WEEE) is now subject to legislation designed to prevent the disposal of such waste and to encourage proper treatment measures to minimize the amount of waste ultimately disposed to lan...

Take-back Policy (UK)

WEEE Policy

To comply with the EU WEEE Directive, the UK government has implemented the Waste Electrical and Electronic Equipment Regulations 2006 (Statutory Instrument 2006 No. 3289). AML is providing a product take back process to cover, treatment, recovery and disposal...

Take-back Policy (EU outside UK)

WEEE Policy

AML products sold in EU countries, other than the UK, are sold through distribution networks. Distributors outside the UK effectively become importers and as such are the ‘Producers’ of AML products within the scope of the EU WEEE Directive. Our distributors w...

Labelled WEEE

WEEE Policy

If you have purchased AML-branded electrical or electronic products in the UK on and after August 13, 2005, and are intending to discard these products at the end of their useful life, please do not dispose of them with your other household or municipal waste....

Historical WEEE

WEEE Policy

Historical waste is defined as WEEE purchased before August 13, 2005. End of life AML branded historical WEEE. The WEEE Directive does not legislate that AML, as a ‘producer’, shall collect ‘end of life’ historical WEEE of its own brand, unless it is being re...

1. Non-Warranty Repairs of PGC1, PGC2, PGC2D, NGC2, NGC2D, NGC3 & SMD210

Repairs Procedure

#1.1. Charges The standard repair charge is £352.00. Return carriage is extra, at cost. We will use your carrier at no extra charge. Packed instruments weight 6.5 kilograms.   #1.2. Procedure Ensure that there is a fault on the AML product. The most co...

2. Frequently Asked Questions

Repairs Procedure

#2.1. What instruments can be repaired? PGC1, PGC2, PGC2D, NGC2, NGC2D, NGC3 & SMD210 instruments that are less than 20 years old. Serial numbers starting with a letter corresponding to the year of manufacture: Nxxx yyy = 2003 Oxxx yyy = 2004 Pxxx yyy = 2...

Remote interfaces

SMD4 User Manual

The SMD4 offers 3 communication interfaces, USB, Ethernet and Serial. The serial interface is dual mode, and can be configured for RS232 or RS485. Multiple interfaces can be connected and in use at the same time. All interfaces use a text-based communication p...

Communications protocol

SMD4 User Manual

A simple text-based protocol is used. Commands are sent to the SMD4, checked and executed, and a response returned. Data are buffered on receipt and commands are evaluated and executed on a first in first out basis. Although not a requirement, it is usually ea...

Compliance Certificate

SMD4 User Manual

                  This declaration of conformity is issued under the sole responsibility of the manufacturer.   Manufacturer: Arun Microelectronics Limited   Address: Unit 2, Bury Mill Farm, Bury Gate, ...