Recently Updated Pages
Identifying and Connecting the Leads
The lead-out wires are self-coloured polyimide film-wrapped, silver-plated OFHC copper and each i...
Instructions
1. Download the latest copy of the API DLL for your product Visit the product page for your prod...
Background
Most AML products have a C# API available to allow easy integration of the product into your own ...
Troubleshooting
If the motor rotates at the wrong speed, frequently changes direction, or has low torque this is ...
Reversal of Rotation
There is a 50% probability that the direction of rotation will be reversed from the desired or co...
Preparation of Motor Leadout Wires for use with Other Feedthroughs
It will be necessary to cut off the crimp terminals fitted to the leads and re-strip them. Standa...
Over-Temperature Protection
All AML motors are provided with a K-type Thermocouple (NiCr-Ni) embedded between adjacent windin...
Vacuum Conditioning
Motors are supplied pre-baked to 200 °C in 1 x 10-6 mbar pressure for 24 hours and vented with dr...
Load Connection
The preferred method of coupling a load to the shaft is by a setscrew or collet fixing. AML do no...
Packing
AML motors are vacuum sealed packaged. Wear gloves to remove the motor from its vacuum packaging....
Summary and Warnings
AML stepper motors are specifically designed for use in UHV environments making them ideally su...
Installation
Before installation WARNING: Read this manual carefully before installing and operating the SMD3...
Software
Installation and setup The SMD3 is compatible with the AML Device Control software, which can be...
2. Frequently Asked Questions
#2.1. What instruments can be repaired? PGC1, PGC2, PGC2D, NGC2, NGC2D, NGC3 & SMD210 instrument...
Historical WEEE
Historical waste is defined as WEEE purchased before August 13, 2005. End of life AML branded hi...
Labelled WEEE
If you have purchased AML-branded electrical or electronic products in the UK on and after August...
Take-back Policy (EU outside UK)
AML products sold in EU countries, other than the UK, are sold through distribution networks. Dis...
Take-back Policy (UK)
To comply with the EU WEEE Directive, the UK government has implemented the Waste Electrical and ...
Waste Electrical and Electronic Equipment (WEEE) Returns
In the European Union (EU), waste from electrical and electronic equipment (WEEE) is now subject ...
Assistance
In the first instance, contact the distributor or supplier of the equipment. Always quote the ser...